Факултет техничких наука у Чачку

ОСНОВНИ БИОГРАФСКИ ПОДАЦИ

Ime i prezime: dr Pavle Spasojević
Datum i mesto rodjenja: 12. septembar 1982.god., Čačak,
Diplomski rad: TMF Beograd-2006.god. (polimerno inženjerstvo)
Doktorska disertacija: TMF Beograd-2012. god.
Naslov disertacije: Modifikacija poli(metilmetakrilatnih) materijala za baze zubnih proteza diestrima itakonske kiselineNaučno zvanje: redovni profesor Tehničkog fakulteta u Čačku,

Profesionalna aktivnost:

- istraživač pripravnik (2010-2011) Inovacioni centar TMF Beograd

- istraživač saradnik (2011-2013) Inovacioni centar TMF Beograd

- naučni saradnik (2013-2018) Inovacioni centar TMF Beograd

- viši naučni saradnik (2018-2024) Inovacioni centar TMF Beograd

- naučni savetnik (2024- ) Inovacioni centar TMF Beograd

- docent (2013-2018) Fakultet Tehničkih nauka u Čačku

- vanredni profesor (2018-2023) Fakultet Tehničkih nauka u Čačku

- redovni profesor (2023- ) Fakultet Tehničkih nauka u Čačku

Naučna aktivnost:

Inženjerstvo polimernih materijala

Inženjerstvo nano-materijala

Inženjerstvo bio-materijala

Održivi razvoj i bio-ekonomija

Članstvo u naučnim društvima: 

Srpsko hemijsko drustvo

Nagrade i priznanja:

Pet nagrada „Panta S. Tutundžić“ za izuzetan uspeh na osnovnim studijama

Nagrade Srpskog hemijskog društva za ukupan uspeh postignut tokom osnovnih studija

Publikacije:

• Autor 53 naučna članka, 50 konferencijskih radova, 4 patenta, 3 tehnička rešenja, 2 poglavlja u monografijama, 2 udžbenika i mentor za 1 doktorsku disertaciju (ukupno 115 rezultata).
• Objavio je 39 radova u visokorangiranim međunarodnim časopisima (kategorije M22–M21a+).
• Prezentovao je oko 50 radova na međunarodnim naučnim konferencijama, uključujući i pozvano predavanje.
• Inovativno angažovanje potvrđuju 4 patenta i 3 tehnička rešenja.
• Njegov rad je prepoznat i u obrazovne svrhe – učestvovao je u pisanju 2 poglavlja u monografijama i 2 udžbenika.
• Citatnost: više od 950 citata (Scopus) čime se ističe međunarodni uticaj.
• h‑indeks19 (Scopus), što odgovara njegovoj uspešnosti i uticaju u naučnim krugovima.
• Kontinuirana aktivnost: 42 rezultata objavljena od 2020. do 2025., što govori o održivoj i relevantnoj naučnoj proizvodnji.

Dva meseca je boravio na usavrsavanju na Univerzitetu u Rostoku, Nemačka

РАДНО И ПЕДАГОШКО ИСКУСТВО

Od 2024. godine zaposlen je kao redovni profesor na Fakultetu tehničkih nauka u Čačku za predmete Tehnički materijali, Materijali, Vlakna i tekstilni materijali, Karakterisanje tekstilnih materijala, Ekologija i Monitoring životne sredine. 

ПУБЛИКАЦИЈЕ

Радови објављени у водећим међународним часописима категорије M21a+ – часописима који су, према IF2, IF5 или JCI, рангирани међу првих 5% часописа у својој научној области.

1. M.D. Markovic, M.M. Svetozarevic, V.V. Panic, S.I. Savic, A.D. Masulovic, P.M. Spasojevic, R.V. Pjanovic, Novel eco-friendly initiation system based on vitamin C for energy efficient synthesis of PMAA hydrogel used for delivery of phenolic compounds, Chemical Engineering Journal, 459 (2023), 141580;

2. M.D. Markovic, S.I. Seslija, V.Dj. Ugrinovic, M. Kunaver, V.V. Panic, R.V. Pjanovic, P.M. Spasojevic, Green pH- and magnetic-responsive hybrid hydrogels based on poly(methacrylic acid) and Eucalyptus wood nanocellulose for controlled release of ibuprofen, Cellulose, 28 (2021), 11109–11132;

3. A.F. Sousa, R. Patrício, Z. Terzopoulou, D.N. Bikiaris, T. Stern, J. Wenger, K. Loos, N. Lotti, V. Siracusa, A. Szymczyk, S. Paszkiewicz, K.S. Triantafyllidis, A. Zamboulis, M.S. Nikolic, P.M. Spasojevic, S. Thiyagarajan, D.S. Van Es, N. Guigo, Recommendations for replacing PET on packaging, fiber, and film materials with biobased counterparts, Green Chemistry, 23 (2021), 8795 - 8820,

4. B.Z. Fidanovski, I.G. Popovic, V.J. Radojevic, I.Z. Radisavljevic, S.D. Perisic, P.M. Spasojevic, Composite materials from fully bio-based thermosetting resins and recycled waste poly(ethylene terephthalate), Composites Part B: Engineering, 153, (2018), 117 - 123,

5. V.V. Panic, S.I. Seslija, I.G. Popovic, V.D. Spasojevic, A.R. Popovic, V.B. Nikolic, P.M. Spasojevic, Simple One-Pot Synthesis of Fully Biobased Unsaturated Polyester Resins Based on Itaconic Acid, Biomacromolecules, Vol.18 No.12 (2017) 3881-3891

6. P.M. Spasojevic, V.V. Panic, M.D. Jovic, J. Markovic, C. Van Roost, I.G. Popovic, S.J. Velickovic, Biomimic hybrid polymer networks based on casein and poly(methacrylic acid). Case study: Ni²⁺ removal, Journal of Materials Chemistry A, Vol.4 No.5 (2016) 1680-1693.

 

Радови објављени у водећим међународним часописима категорије M21a – часописима који су, према IF2, IF5 или JCI, рангирани између 5% и 15% у својој научној области.

1. M.D. Marković, P.M.  Spasojević, O.J. Pantić, S.I. Savić, M.M. Spasojević Savković, V.V. Panić, Status and future scope of hydrogels in wound healing, Journal of Drug Delivery Science and Technology, 98 (2024), 105903-105903;

  2. V.V. Panic, J.D. Jovanovic, I.G. Popovic, S.I. Savic, M.D. Markovic, P.M. Spasojevic, B.K. Adnadjevic, The study of composition-properties relationships for composite hydrogels based on poly(methacrylic acid) and high concentrations of MFI zeolite, Polymer, 269 (2023),125750;

3. O.J. Pantić, M.M. Spasojevic, E.S. Džunuzović, M.S. Nikolić, S.I. Savić, M.D. Marković, P.M. Spasojević, The Effect of Glycol Derivatives on the Properties of Bio-Based Unsaturated Polyesters, Polymers, 2022, 14(15), 2970;

4. P.M. Spasojević, S.I. Savić, M.D. Marković, O.J. Pantić, K.M. Antic, M.M. Spasojevic, Optimization of Reactive Diluent for Bio-Based Unsaturated Polyester Resin: A Rheological and Thermomechanical Study, Polymers, 2021, 13(16), 2667;

5. M.D. Markovic, P.M. Spasojevic, S.I. Seslija, I.G. Popovic, D.N. Veljovic, R.V. Pjanovic, V.V. Panic, Casein-poly(methacrylic acid) hybrid soft networks with easy tunable properties, European Polymer Journal, 113 (2019), 276 - 288

6. S. Seslija, P.M. Spasojević, V. Panić, M. Dobrzyńska-Mizera, B. Immirzi, J. Stevanović, I. Popović, Physico-chemical evaluation of hydrophobically modified pectin derivatives: Step toward application, International Journal of Biological Macromolecules, Vol. 113 (2018) 924-932.

7. V.V. Panic, P.M. Spasojevic, T.S. Radoman, E.S. Dzunuzovic, I.G. Popovic, S.J. Velickovic, Methacrylic acid based polymer networks with a high content of unfunctionalized nanosilica: particle distribution, swelling, and rheological properties, Journal of Physical Chemistry C, Vol.119 No.1 (2015) 610-622.

8. M. Spasojević, N. Ćirović, L. Ribić-Zelenović, P.M. Spasojević, A. Maričić, Effect of deposition current density and annealing temperature on the microstructure, hardness and magnetic properties of nanostructured nickel-iron-tungsten alloys, Journal of the Electrochemical Society, Vol.161 No.10 (2014) D463-D469.

9. M. Spasojević, A. Maričić, L. Ribić Zelenović, N. Krstajić, P.M. Spasojević, The kinetics of hydrogen absorption/desorption within nanostructured composite Ni_79.1Co_18.6Cu_2.3 alloy using resistometry, Journal of Alloys and Compounds, Vol.551 No.- (2013) 660-666.

10. M. Spasojević, L. Ribić-Zelenović, P.M. Spasojević, Microstructure of new composite electrocatalyst and its anodic behavior for chlorine and oxygen evolution, Ceramics International, Vol.38 No.7 (2012) 5827-5833.

 

Радови објављени у водећим међународним часописима категорије M21 – часописима који су, према IF2, IF5 или JCI, рангирани између 15% и 35% у својој научној области.

1. M.D. Markovic, V.V. Panic, S.I. Savic, V.Dj. Ugrinovic, R.V. Pjanovic, M.M. Spasojevic, P.M. Spasojevic, Biobased thermo/pH sensitive poly(N-isopropylacrylamide-co-crotonic acid) hydrogels for targeted drug delivery, Microporous and Mesoporous Materials 335 (2022), 111817; 

2. G.A. Lazouzi, M.M. Vuksanović, N. Tomić, M. Petrović, P.M. Spasojević, V. Radojević, R. Jančić Heinemann, Dimethyl Itaconate Modified PMMA - Alumina Fillers Composites With Improved Mechanical Properties, Polymer Composites, 40 (2019), 1691 – 1701

3. B.Z. Fidanovski, P.M. Spasojevic, V.V. Panic, S.I. Seslija, J.P. Spasojevic, I.G. Popovic, Synthesis and characterization of fully bio-based unsaturated polyester resins, Journal of Materials Science, Vol.53 No.6 (2018) 4635-4644.

4. T.S. Radoman, J.V. Džunuzović, P.M. Spasojević, M.T. Marinović-Cincović, K.B. Jeremić, I.G. Popović, E.S. Džunuzović, Preparation and properties of short oil alkyd resin/TiO2 nanocomposites based on surface modified TiO₂ nanoparticles, Polymer Composites, Vol.39 No.5 (2016) 1488-1499.

5. J.D. Rusmirović, T. Radoman, E.S. Džunuzović, J.V. Džunuzović, J. Markovski, P.M. Spasojević, A.D. Marinković, Effect of the modified silica Nanofiller on the Mechanical Properties of Unsaturated Polyester Resins Based on Recycled Polyethylene Terephthalate, Polymer Composites, Vol.38 No.3 (2017) 538-554.

6. M. Spasojević, N. Krstajić, P.M. Spasojević, L. Ribić-Zelenović, Modelling current efficiency in an electrochemical hypochlorite reactor, Chemical Engineering Research and Design, Vol.93 No.- (2015) 591-601.

7. P.M. Spasojević, V.V. Panić, J.V. Džunuzović, A.D. Marinković, A.J.J. Woortman, K. Loos, I.G. Popović, High performance alkyd resins synthesized from postconsumer PET bottles, RSC Advances, Vol.5 No.76 (2015) 62273-62283.

8. M. Spasojević, L. Ribić-Zelenović, A. Maričić, P.M. Spasojević, Structure and magnetic properties of electrodeposited Ni_87.3Fe_11.3W_1.4 alloy, Powder Technology, Vol.254 No.- (2014) 439-447.

9. P.M. Spasojević, J. Jovanović, B. Adnadjevic, Unique effects of microwave heating on polymerization kinetics of poly(methyl methacrylate) composites, Materials Chemistry and Physics, Vol.141 No.2-3 (2013) 882-890.

10. P.M. Spasojević, D. Stamenković, R. Pjanović, N. Bošković-Vragolović, J. Dolić, S. Grujić, S. Veličković, Diffusion and solubility of commercial poly(methyl methacrylate) denture base material modified with dimethyl itaconate and di-n-butyl itaconate during water absorption/desorption cycles, Polymer International, Vol.61 No.8 (2012) 1272-1278. 

 

Радови објављени у међународним часописима категорије M22 – часописима који су, према IF2, IF5 или JCI, рангирани између 35% и 75% у својој научној области.

1. V.Dj. Ugrinović, V.V. Panic, P.M. Spasojević, S.I. Seslija, B.Dj. Bozic, R.D. Petrović, Dj.T. Janaćković, Dj.N. Veljovic, Strong and tough, pH sensible, interpenetrating network hydrogels based on gelatin and poly(methacrylic acid). Polymer Engineering and Science, 62 (2022), 622-636;

2. M.D. Markovic, V.V. Panic, S.I. Seslija, A.D. Milivojevic, P.M. Spasojevic, N.M. Boskovic-Vragolovic, R.V. Pjanovic, Novel strategy for encapsulation and targeted delivery of poorly water-soluble active substances, Polymer Engineering & Science, 60 (2020), 2008-2022,

3. M.D. Markovic, V.V. Panic, S.I. Seslija, P.M. Spasojevic, V.Dj. Ugrinovic, N.M. Boskovic-Vragolovic, R.V. Pjanovic, Modification of hydrophilic polymer network to design a carrier for a poorly water-soluble substance, Polymer Engineering & Science, 60 (2020), 2496-2510

4. N. Ćirović, P.M. Spasojević, L. Ribić-Zelenović, P. Mašković, A. Maričič, M. Spasojević, Synthesis, structure and properties of nickel-iron-tungsten alloy electrodeposits: Part II: Effect of microstructure on hardness, electrical and magnetic properties, Science of Sintering, Vol.48 No.1 (2016) 1-16.

5. N. Ćirović, P.M. Spasojević, L. Ribić-Zelenović, P. Mašković, M. Spasojević, Synthesis, structure and properties of nickel-iron-tungsten alloy electrodeposits part I: Effect of synthesis parameters on chemical Composition, Microstructure and Morphology, Science of Sintering, Vol.47 No.3 (2015) 347-365.

6. P.M. Spasojevic, M. Zrilic, V. Panic, D. Stamenkovic, S. Seslija, S. Velickovic, The Mechanical Properties of a Poly(methyl methacrylate) Denture Base Material Modified with Dimethyl Itaconate and Di-n-butyl Itaconate, International Journal of Polymer Science, Vol.2015 No.- (2015).

7. P.M. Spasojević, V. Panić, S. Šešlija, V. Nikolić, I.G. Popović, S. Veličković, Poly(methyl methacrylate) denture base materials modified with ditetrahydrofurfuryl itaconate: Significant applicative properties, Journal of the Serbian Chemical Society, Vol.80 No.9 (2015) 1177-1192.

8. O. Pešić, M. Spasojević, B. Jordović, P.M. Spasojević, A. Maričić, Effect of electrodeposition current density on the microstructure and magnetic properties of nickel-cobalt-molybdenum alloy powders, Science of Sintering, Vol.46 No.1 (2014) 117-127.

9. M.D. Spasojević, L.J. Ribić-Zelenović, P.M. Spasojević, B.Ž. Nikolić, Current efficiency in the chlorate cell process, Journal of the Serbian Chemical Society, Vol.79 No.6 (2014)

10. M. Spasojević, L. Ribić-Zelenović, N. Ćirović, P.M. Spasojević, A. Maričić, Effect of milling and annealing on microstructural, electrical and magnetic properties of electrodeposited Ni-11.3Fe-1.4W alloy, Science of Sintering, Vol.44 No.2 (2012) 197-210.

11. P.M. Spasojević, B. Adnadević, S. Veličković, J. Jovanović, Influence of microwave heating on the polymerization kinetics and application properties of the PMMA dental materials, Journal of Applied Polymer Science, Vol.119 No.6 (2011) 3598-3606.

12. D. Žugić, P.M. Spasojević, Z. Petrović, J. Djonlagić, Semi-interpenetrating networks based on poly(N-isopropyl acrylamide) and poly(N-vinylpyrrolidone), Journal of Applied Polymer Science, Vol.113 No.3 (2009) 1593-1603.

 

Радови објављени у међународним часописима категорије M23 – часописима који су, према IF2, IF5 или JCI, рангирани између 75% и 100% у својој научној области.

1. Z. Vuković, P.M. Spasojević, M. Plazinić, J. Živanić, M. Spasojević, The effect of annealing temperatures on magnetic and electric properties of electrodeposited Ni_85,3Fe_10,6W_1,4Cu_2,2 alloy, Journal of Optoelectronics and Advanced Materials, Vol.16 No.7-8 (2014) 985-989.

2. A.D. Marinković, T. Radoman, E.S. Džunuzović, J.V. Džunuzović, P.M. Spasojević, B. Isailović, B. Bugarski, Mechanical properties of composites based on unsaturated polyester resins obtained by chemical recycling of poly(ethylene terephthalate), Hemijska Industrija, Vol.67 No.6 (2013) 913-922.

3. T.S. Radoman, J.V. Džunuzović, K.B. Jeremić, A.D. Marinković, P.M. Spasojević, I.G. Popović, E.S. Džunuzović, The influence of the size and surface modification of TiO₂ nanoparticles on the rheological properties of alkyd resin, Hemijska Industrija, Vol.67 No.6 (2013) 923-932.

4. M.D. Spasojević, T.L. Trišović, L. Ribić-Zelenović, P.M. Spasojević, Development of RuO₂/TiO₂ titanium anodes and a device for in situ active chlorine generation, Hemijska Industrija, Vol.67 No.2 (2013) 313-321.

5. P.M. Spasojević, M. Zrilić, D.S. Stamenković, S.J. Veličković, The effect of accelerated aging on the mechanical properties of pmma denture base materials modified with itaconates, Hemijska Industrija, Vol.65 No.6 (2011) 707-715.