Personal Information

Name: Vanja Luković

Date of Birth: August 19, 1976 in Čačak

Marital Status: Married, mother of three children

Residential Address: Knjiganićeva 14, 32000 Čačak, Serbia

Phone: 032/302-762

Email: vanja.lukovic@ftn.kg.ac.rs

Academic Title

Associate Professor

Education

On October 29, 2015, at the Faculty of Technical Sciences in Čačak, she defended her doctoral dissertation titled: "Ontology-based Information System for Diagnosing and Monitoring Spinal Deformities," under the mentorship of Dr. Danijela Milošević, Associate Professor, and obtained the title of Doctor of Technical Sciences. Available at: Link to the dissertation

On November 24, 2007, at the School of Electrical Engineering in Belgrade, she defended her master's thesis titled: "Comparative Analysis of Visualization Systems with Implementation of Algorithms on Dynamic Data Structures," under the mentorship of Dr. Jelica Protić, Associate Professor, and obtained the title of Master of Electrical Engineering - specialization in Computer Systems Architecture and Organization.

From 1995 to 2000, she studied at the Technical Faculty in Čačak, in the Department of Electrical Engineering, specializing in Industrial Energy, and obtained the title of Diplom Engineer in Electrical Engineering with an average grade of 9.47 during her studies. She defended her diploma thesis on the topic: "Application of Variable States in the Analysis of Electrical Circuits" with a grade of 10. She was awarded several times during her studies for her academic achievements.

Gymnasium, Natural Sciences and Mathematics Department in Čačak - recipient of the Vuk Karadžić diploma.

Elementary school "Milica Pavlović" in Čačak - recipient of the Vuk Karadžić diploma.

Publication Experience

From April 13, 2016, until present, she holds the position of Assistant Professor in the field of Computer Engineering at the Faculty of Technical Sciences in Čačak, where she is involved in teaching and conducting exercises in the following courses: Introduction to Programming, Programming Languages, Programming Language Laboratory, Object-Oriented Programming, Fundamentals of Computer Engineering 1, Fundamentals of Computer Engineering 2 in undergraduate studies, and Object-Oriented Design and Methodology, Intelligent Systems, and Methodological Workshop in Programming Fundamentals at the Master's level.

From December 25, 2008, to April 13, 2016, she worked as an Assistant in the field of Computer Engineering at the Faculty of Technical Sciences in Čačak, where she conducted exercises in courses such as Programming Languages, Object-Oriented Programming, Fundamentals of Computer Engineering 1, Fundamentals of Computer Engineering 2, and Intelligent Systems.

From September 1, 2001, to December 25, 2008, she was employed at the Technical Faculty in Čačak as an Assistant Trainee. From her employment until September 2004, she was involved in conducting exercises in the subjects Fundamentals of Computer Engineering and Digital Control Systems. From October 2004 to 2008, she conducted exercises in the subjects Programming Languages, Object-Oriented Programming, and Fundamentals of Computer Engineering.

From 1999 to 2000, she worked as a demonstrator in the subject Fundamentals of Electrical Engineering at the Technical Faculty in Čačak on an honorary basis.

Management of Scientific Projects funded by scientific communities and ministries of science

"Modernization of the Curriculum for the Fundamentals of Computer Engineering Course in the Study Program of IT Assistants" at the Faculty of Technical Sciences in Čačak. Project Leader: Dr. Vanja Luković, Assistant Professor (from October 2017 to April 2018).

Participation in Scientific Projects funded by scientific communities and ministries of science

"Development of a Strategy for the Development and Implementation of E-Learning in Serbia and Montenegro", bilateral project between the Faculty of Electrical Engineering, Computer Science and Informatics, University of Maribor, Slovenia, and the Technical Faculty Čačak, University of Kragujevac. Project Leader: Dr. Radojka Krneta, Technical Faculty Čačak. (2006-2007)

"Ontological Modeling in Bioengineering", Ministry of Science and Technological Development of the Republic of Serbia, TR-12002, Faculty of Mechanical Engineering Kragujevac. Project Leader: Prof. Dr. Goran Devedžić. (2008-2010)

"Application of Biomedical Engineering in Preclinical and Clinical Practice", (sub-project "Biomechanics", led by Prof. Dr. Goran Devedžić) Ministry of Science and Technological Development of the Republic of Serbia, III-41007, Faculty of Engineering Sciences Kragujevac. Project Leader: Prof. Dr. Nenad Filipović (from January 2011 to present).

"Building a Network of Remote Labs for Strengthening University-Secondary Vocational Schools Collaboration", TEMPUS-1-2013-1-RS-TEMPUS-JPHES (2013-2016). Project Leader: Dr. Radojka Krneta, Associate Professor.

"BioEMIS: Studies in Bioengineering and Medical Informatics", 530423-TEMPUS-1-2012-1-UK-TEMPUS-JPCR, EU: University of Birmingham (UK) - coordinator/grant holder, University of Maribor (Slovenia), University Pierre and Marie Curie - Paris 6, Sorbonne (France), Tampere University of Technology (Finland); SERBIA: University of Kragujevac (Serbia), University of Belgrade (Serbia), University of Defense (Serbia), University of Niš (Serbia), Military Medical Academy (Serbia), Clinical Center Kragujevac (Serbia), NARCISSUS, Ada (Serbia), ORTODENT, Niš (Serbia), ORTOKON (Serbia), Serbian Medical Chamber (Serbia); MONTENEGRO: University of Montenegro, Montenegrin Medical Chamber, Montenegrin Ministry of Education and Sports, Institute "Dr. Simo Milošević", Igalo, Cikom Informatical Eng. Ltd.; BOSNIA AND HERZEGOVINA: University of Banja Luka, University of East Sarajevo, University of Mostar, University of Bihac, NITES-National/ Regional Contact Person (2012-2016)

"Development of Software and Hardware in Biomedical Engineering", project code TR1651045. Project supported by the Ministry of Education, Science and Technological Development of the Republic of Serbia. Project Leader: Faculty of Engineering Sciences in Kragujevac. Project Leader: Prof. Dr. Nenad Filipović (2016-2019) (researcher on the project).

"Modernization of the Curriculum for the Fundamentals of Computer Engineering Course in the Study Program of IT Assistants" Ministry of Education, Science and Technological Development, "2005 - Higher Education", program activity "0014 - Development of Higher Education", project leader: Dr. Vanja Luković, implementation period: November 30, 2017, to May 14, 2018.

Monographs, monographic studies, thematic collections, publications of international significance

[M13] Sasa Cukovic, William Taylor, Christoph Heidt, Goran Devedzic, Vanja Lukovic, Tito Bassani, “Transpositions of Intervertebral Centroids in Adolescents Suffering From Idiopathic Scoliosis Optically Diagnosed”, In Book Computer Methods, Imaging and Visualization in Biomechanics and Biomedical Engineering. CMBBE 2019. Lecture Notes in Computational Vision and Biomechanics, Editors: Ateshian G., Myers K., Tavares J., Vol. 36., pp. 133-141, DOI: 10.1007/978-3-030-43195-2_10, ISSN 2212-9391, ISBN 978-3-030-43194-5, Springer, Cham, Switzerland, 2020.

Publications in a top-tier international journal

[M21] Goran Devedzic, Sasa Cukovic, Vanja Lukovic, Danijela Milosevic, Karuppasamy Subburaj, and Tanja Lukovic, “ScolioMedIS: Web-oriented information system for idiopathic scoliosis visualization and monitoring”, Computer Methods Programs in Biomedicine, 2012, Vol. 108, No. 2, pp. 736–749, ISSN: 0169-2607, Doi 10.1016/j.cmpb.2012.04.008.

[M21] Vanja Luković, Saša Ćuković, Danijela Milošević and Goran Devedžić, “An ontology-based module of the information system ScolioМedIS for 3D digital diagnosis of adolescent scoliosis“, Journal of Computer Methods Programs in Biomedicine, 2019, Vol. 178, pp. 247-263, ISSN: 0169-2607, Doi: 10.1016/j.cmpb.2019.06.027.

Publications in a prominent international journal

[M22] Tanja Lukovic, Sasa Cukovic, Vanja Lukovic, Goran Devedzic, and Dusica Djordjevic, “Towards a new protocol of scoliosis assessments and monitoring in clinical practice: A pilot study”, Journal of Back and Musculoskeletal Rehabilitation, 2015, Vol. 28, No. 4, pp. 721-730, ISSN 1053-8127, DOI: 10.3233/bmr-140574.

[M22] Milentije Lukovic, Vanja Lukovic, Ivan Belca, Becko Kasalica, Ivan Stanimirovic, and Milos Vicic, “LED-based Vis-NIR spectrally tunable light source - the optimization algorithm”, Journal of the European Optical Society-Rapid Publications, 2016, Vol. 12, No. 19, pp. 1-12, ISSN: 1990-2573, DOI: 10.1186/s41476-016-0021-9.

Publication in an international journal

[M23] Vanja Lukovic, Danijela Milosevic, Goran Devedzic, Camil Sukic, Mensura Kudumovic, Branko Ristic: “OBR-Prox-Femur Application Ontology Development and Modeling“, HealthMED journal, 2010, Vol. 4, No. 2, pp. 404-416, ISSN: 1840-2291. Available at: OnlineLink

 [M23] Vanja Lukovic, Danijela Milosevic, Goran Devedzic, and Sasa Cukovic, “Converting OBR-Scolio ontology in OWL DL”, Computer Science and Information Systems, 2013, Vol. 10, No. 3, pp. 1359–1385, ISSN: 1820-0214, Doi 10.2298/csis120611053l. Available at: OnlineLink 

[M23] Milentije Luković, Vanja Luković, Miloš Božić, Vojislav Vujičić, “Inexpensive Physical pendulum with Arduino “, The  Physics Teacher, 2021, Vol. 59, No. 6, pp. 432-435, ISSN: 0031-921X, DOI: 10.1119/10.0006155

Publication in an internationally recognized journal verified by a special decision

[M24] Vanja Luković, Danijela Milosević, Goran Devedić, “Integrating biomedical ontologies – OBR-Scolio ontology”. Special Issue on ICIT 2009 conference - Bioinformatics and Image, UbiCC Journal, 2009, Vol. 4, No.3, pp. 664-669, ISSN: 1992-8424.

[M24] Sonja Kostić, Aleksandar Košarac, Vanja Luković, Jasmina Miljojković, “Theory Reviews - Hardware and Software Support for Testing Material on Specimens of the Small Cross Section”, Tribology in Industry, 2019, Vol. 41, No. 1 pp. 109-114, ISSN: 0354-8996, Doi: 10.24874/ti.2019.41.01.12

[M24] Sanja Antić, Vanja Luković, Željko Đurović, ”Expert System for FDI of DC Motor Faults Using Structured Residuals Design Technique”, Serbian Journal of Electrical Engineering, 2005, Vol. 20, No. 1, pp. 93-105, Faculty of Technical Sciences Čačak, ISSN: 1451-4869, DOI: 10.2298/SJEE2301093A

Publication at internationally significant conferences, printed in full

[M33] Vanja Lukovic, Danijela Milosevic, Goran Devedzic: ”Integrating Biomedical Ontologies With FMA Reference Ontology”, The 4th International Conference on Information Technology - ICIT 2009,  3-5. June 2009, Amman, Jordan, AL-Zaytoonah University, pp. 576-581, ISSN: 1992-8424, ISBN: 9957-8583-0-0

[M33] Vanja Luković, Danijela Milosević, Goran Devedžić: ”Modeling of partitive relations of the OBR-Scolio application ontology using SEP triplet methodology”, The 5th International Conference Euro-Mediterranean Medical Informatics and Telemedicine - EMMIT 2009, 16-18. October 2009, Beirut, Lebanon, EMMIT association and International Instituteof Tele-Medicine

[M33] Vanja Luković, Danijela Milošević, Saša Ćuković, Goran Devedžić: “Design issues of the ScolioMed system”, 19th International Electrotechnical and Computer Science Conference - ERK 2010, 20-22 September 2010, Portorož, Slovenia, pp 351-354, ISSN: 1581-4572 (print)

[M33] Goran Devedžić, Saša Ćuković, Radovan Stojanović, Danijela Milošević, Vanja Luković: “Identification of Anatomical Landmarks for Intelligent Postural Sensing”, 2012 Mediterranean Conference on Embedded Computing - MECO 2012, 19-21. June 2012, Bar, Montenegro, Institute of Electrical and Electronics Engineers, pp. 70-73, ISBN: 978-1-4673-2366-6, ISSN: 2377-5475,OnlineLink 

[M33] Saša Ćuković, Frieder Pankratz, Antonio Uva, Goran Devedžić, Vanja Luković, Michele Fiorentino, Tanja Zečević Luković: “Conceptual augmented reality framework for spinal disorders representation and diagnosis”, The 2nd Regional Conference - Mechatronics In Practice And Education – MechEdu 2013, 5-6. December 2013, Subotica, Serbia, Subotica-Tech - College of Applied Sciences Subotica, pp.13-17, ISBN: 978-86-7892-565-8

[M33] Saša Ćuković, Frieder Pankratz, Goran Devedžić, Gudrun Klinker, Vanja Luković, Lozica Ivanović: “An interactive augmented reality platform for CAD education”, 35th International Conference on Production Engineering - ICPE 2013, 25-28. September 2013, Kraljevo-Kopaonik, Serbia, Faculty of Mechanical and Civil Engineering in Kraljevo - Department of Production Technologies, pp. 353-356, ISBN: 978-86-82631-69-9

[M33] Vanja Lukovic, Danijela Milosevic, Sasa Cukovic and Goran Devedzic, “Development of application ontology of Lenke's classification of scoliosis - OBR-Scolio”, The 15th IEEE International Conference on BioInformatics and BioEngineenering - BIBE2015, 2–4 November 2015, Belgrade, Serbia,  pp. 532-537, Institute of Electrical and Electronic Engineers - Inc, ISBN: 978-1-4673-7982-3, Doi: 10.1109/BIBE.2015.7367732

[M33] Sasa Cukovic, Vanja Lukovic, Subburaj Karupppasamy, Wolfgang Birkfellner, Danijela Milosevic, Branko Ristic and Goran Devedzic: „Automated SOSORT-recommended Angles Measurement in Patients with Adolescent Idiopathic Scoliosis”, The 15th IEEE International Conference on BioInformatics and BioEngineenering - BIBE 2015, 2 – 4. November 2015, Beograd, Serbia, pp. 448-453, Institute of Electrical and Electronic Engineers - Inc, ISBN: 978-1-4673-7982-3, Doi: 10.1109/bibe.2015.7367716

[M33] Milentije Luković, Sanja Antić, Vanja Luković: „Simple electrical circuit to light up a gas discharge lamp”, 6th International Conference Technics and Informatics in Education – TIO 2016, 28−29. May 2016, Čačak, Serbia, pp. 57-62, Faculty of Technical Sciences Čačak, ISBN: 978-86-7776-192-9, OnlineLink

[M33] Vanja Luković, Radojka Krneta, Aleksandar Peulić, Željko Jovanović, Đorđe Damnjanović: „Learning Bitwise Operations in C Using Remote Experiment on Floating LEDs Blinking”, Proceedings of 3rd International Conference on Electrical, Electronic and Computing Engineering IcETRAN 2016, 13 – 16. June 2016, Zlatibor, Serbia, pp. AUI1.4.1-6, ETRAN Society Faculty of Electronic Engineering, University of Niš, ISBN: 978-86-7466-618-0

[M33] Vanja Luković, Radojka Krneta, Ana Vulović, Christos Dimopoulos, Konstantinos Katzis, Maria Meletiou-Mavrotheris: „Using Logisim Educational Software in Learning Digital Circuits Design”, 3rd International Conference on Electrical, Electronic and Computing Engineering IcETRAN 2016, pp. AUI1.5.1-6, Zlatibor, Serbia, June 13 – 16, 2016, ISBN 978-86-7466-618-0, OnlineLink

[M33] Sasa. Cukovic, Goran Devedzic, Tanja Lukovic, Vanja Lukovic: „From Generic to the Patient Specific 3D Model of the Spine in Case of Adolescent Idiopathic Scoliosis (AIS)”, 22nd Congress of the European Society of Biomechanics – ESB 2016, 10-13. July 2016, Lyon, France, European Society of Biomechanics, pp. 1-13.

[M33] Vanja Luković, Aleksandar Peulić, Radojka Krneta, Đorđe Damnjanović, Ana Vulović, Christos Dimopoulos and Konstantinos Katzis: „Comparison of the effectiveness of Logisim software tool and remote experiments based on Nexys 2 FPGA platform in learning digital circuits design”, 4th Experiment@International Conference - exp.at’17, 6-8 June 2017, Faro, Portugal, University оf Algarve, pp. 247-252,  ISBN (print): 978-1-5386-0811-1, ISSN:
2376-631X, Doi 10.1109/EXPAT.2017.7984400

[M33] Vanja Luković, Raojka Krneta, Đorđe Damnjanović and Aleksandar Peulić: „The remote lab “Nexys 2 FPGA platform” aimed for learning design of digital circuits”, 4th Experiment@International Conference - exp.at’17, 6-8. June 2017, Faro, Portugal, University оf Algarve, pp. 101-102, 978-1-5386-0810-4, ISBN: 978-1-5386-0811-1, Doi 10.1109/EXPAT.2017.7984350

[M33] Vanja Luković, Saša Ćuković, Goran Devedžić: “Optical methods for the estimation and 2D classification of idiopathic scoliosis”, 7th IEEE Mediterranean Conference on Embedded Computing -  MECO2018, 10-14. June 2018, Budva, Montenegro, Institute of Electrical and Electronics Engineers, pp. 496-499, ISBN: 978-1-5386-5682-2, Doi: 10.1109/MECO.2018.8405976

[M33] Sasa Cukovic, Ionut Ghionea, Vanja Lukovic and William R. Taylor: “Complex curvature analysis of the middle spinal line in non-ionizing 3D diagnosis of adolescent idiopathic disorders”, IEEE International Conference on Biological Information and Biomedical Engineering - BIBE2018, 6-8. July 2018, Shanghai, China, Institute of Electrical and Electronic Engineers - Inc, pp. 284 - 287, ISBN: 978-3-8007-4727-6, OnlineLink

[M33] Saša Ćuković, Vanja Luković, Wiliam R. Taylor, Wolfgang Birkfellner, Radu Emanuil Petruse, Nenad Filipović: “Correlation оf Vertebral Absolute Axial Rotations in Cad 3d Models Of Adolescent Idiopathic Scoliosis Non-Invasively Diagnosed”, The 19th IEEE International Conference on BioInformatics and BioEngineering – BIBE 2019, 28-30. October 2019, Athens, Greece, Institute of Electrical and Electronic Engineers - Inc, pp. 316-320, ISBN: 978-1-7281-4617-1, DOI: 10.1109/BIBE.2019.00063.

[M33] Saša Ćuković, William Taylor, Vanja Luković, Ionut Ghionea, Khelifa Baizid, Jamshed Iqbal and Subburaj Karuppasamy: “Rigid 3D registration algorithm for localization of the vertebral centroids in 3D deformity models of adolescent idiopathic scoliosis,” The 16th annual International CAD Conference - CAD19, 24-26. June 2019, Singapore, CAD Solutions LLC, pp. 446-450, Doi: 10.14733/cadaps.2020.1313-1325

[M33] Vanja Luković, Saša Ćuković, Goran Devedžić, Danijela Milošević: “Analyses Phase in development of the ScolioMedIS system”, 9th IEEE Mediterranean Conference on Embedded Computing -  MECO2020, 8-11. June 2020, Budva, Montenegro, Institute of Electrical and Electronics Engineers, pp. 718-725, ISBN: 978-1-7281-6947-2, MECO2020, Doi: 10.1109/MECO49872.2020.9134135

[M33] Nataša Nikolić, Vanja Luković: „Analysing of software tools for designing and simulating of digital circuits“ 8th International Scientific Conference Technics and Informatics in Education Faculty of Technical Sciences – TIE 2020, pp. 269–275, 18-20 September 2020, Čačak, Serbia, ISBN: 978-86-7776-247-6, OnlineLink

[M33] Uros Pesovic, Sladjana Djurasevic, Vanja Lukovic and Peter Planinsic: „Interference Classification for IEEE 802.15.4 Networks“ 2020 International Conference on Broadband Communications for Next Generation Networks and Multimedia Applications (CoBCom), 7 – 9. July 2020, Graz, Austria, ISBN:  978-1-7281-7492-1,  Doi: 10.1109/CoBCom49975.2020.9174119

[M33] Milentije Luković, Vesna Veliković, Vanja Luković: „Mathematica software graphical simulation of Iodine isotopes nuclear decay for teaching purposes”, 9th International Conference Technics and Informatics in Education – TIO 2022, 16-18 September 2022, Čačak, Serbia, pp. 320-325, Faculty of Technical Sciences Čačak, ISBN: 978-86-7776-262-9, Doi: 10.46793/TIE22.320L

[M33] Mihailo Knežević, Slađana Đurašević, Vanja Luković, Željko Jovanović, and Uroš Pešović: „Use of electronic design automation tools in computer engineering courses”, 9th International Conference Technics and Informatics in Education – TIO 2022, 16-18 September 2022, Čačak, Serbia, pp. 137-140, Faculty of Technical Sciences Čačak, ISBN: 978-86-7776-262-9, Doi: 10.46793/TIE22.320L

[M33] Slađana Đurašević, Pešović Uroš, Vanja Luković, Borisav Đorđević: „Analysis of write amplification on solid state drives in datacenters”, The 19th International Conference on Informatics and Information Technologies – CIIT 2022, 5-6th May, 2022, Skopje, North Macedonia, pp. 54-57, Faculty of Computer Science and Engineering, ISBN 978-608-4699-15-6, OnlineLink

[M33]           Sanja Antić, Vanja Luković, Marko Rosić, Uroš Pešović: „FPGA Digital Circuit for actuator and sensor FDI in DC Motor with an amplifier“ - The 10th International Conference on Electrical, Electronic and Computing Engineering – IcETRAN 2023, 5-8 June 2023, East Sarajevo, Bosnia and Herzegovina, ISBN 978-86-7466-970-9, Doi: 10.1109/IcETRAN59631.2023.10192108

[M33] Veljko Lončarević, Željko Jovanović, Vanja Luković, Marina Milošević, Savo Šućurović, and Aleksa Iričanin: „Horizontal Scaling with Session Preservation of PHP Applications with MVC Architecture“ - The 10th International Conference Technics, Informatics, and Education – TIE 2024, 20-22 September 2024, Čačak, Serbia, ISBN 978-86-7776-276-6, DOI: 10.46793/TIE24.034L

[M33] M. Luković, V. Luković, M. Knežević, D. Miljanić: „Computational Analysis and Simulation of Geiger-Müller Counter Instrument F-factor Using Wolfram Mathematica Software: Case Study of LARA 10 as integrated part of Radiation Laboratory LR-M2“ - The 10th International Conference Technics, Informatics, and Education – TIE 2024, 20-22 September 2024, Čačak, Serbia, ISBN 978-86-7776-276-6, Doi: 10.46793/TIE24.261L

[M33] O. Tomić, O. Ristić,  M. Milošević, V. Luković, M. Ostojić: „Applying MLOPS in software quality assurance of the analytics application market“- III International Conference on Advances in Science and Technology – COAST 2024, 29. May-1. Jun 2024, Herceg Novi, Montenegro, pp. 351-363, ISBN 978-9940-611-08-8.

[M33] D. Stojić, S. Ćuković,  V. Luković, D. Vujičić: „Display of spinal deformities in AR ar environment“- XIII international conference on social and technological development – STED 2024, June, 06-09, 2024. Trebinje, Republic of Srpska, B&H, pp. 311-317, ISBN 978-99955-40-79-1, DOI 10.7251/STEDZ2401311S

Publication at internationally significant conferences, printed as abstracts

[M34] Saša Ćuković, William Taylor, Michele Fiorentino, Vanja Luković, Goran Devedžić, Subburaj Karupppasamy, Silvio Lorenzetti, “Non-Ionizing Three-Dimensional Estimation of Axial Vertebral Rotations in Adolescents Suffering from Idiopathic Scoliosis”, 15th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering – CMBBE2018, 26-29. Mart 2018, Lisbon, Portugal, Instituto Superior Tecnico, pp. 215 - 215, ISBN: 978-989-99424-5-5

[M34] Saša Ćuković, Vanja Luković, Goran Devedžić, Zahra Asgharpour, Matthias Rüger, Navrag Singh, William R. Taylor: „From Concept to Clinical Practice: A Novel Non-ionizing 3D Imaging Approach for Identifying Idiopathic Disorders in the Human Spine”, 8th World Congress of Biomechanics 2018 - WCB2018, 8. - 12. July 2018, Dublin, Ireland, World Congress of Biomechanics, pp. 1196, OnlineLink

[M34] Sasa Cukovic, William Taylor, Christoph Heidt, Goran Devedzic, Vanja Lukovic, Tito Bassani, “Transpositions of Intervertebral Centroids in Adolescents Suffering from Idiopathic Scoliosis Optically Diagnosed”, 16th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering and the 4rd Conference on Imaging and Visualization – CMBBE2019, 14-16. August 2019, New York, USA, Columbia University of New York, pp.109, ISBN: 978-989-99424-5-5, Doi:10.1007/978-3-030-43195-2_10

[M34] Saša Ćuković, Vanja Luković, Christoph Heidt, William R. Taylor: “Baricentricity of Spinal Alignment and Posture in Adolescent Idiopathic Scoliosis: Optical Diagnosis”, The XXVIII Congress of the International Society of Biomechanics - ISB2021, July 25-29., 2021 Stockholm, Sweden, pp.A69, Doi: 10.3929/ethz-b-000525448

[M34] Sasa Cukovic, Baricentricity of Spinal Alignment and Posture in Adolescent Idiopathic Scoliosis William R. Taylor, Vanja Luković, Christoph Heidt, Radu Petruse, Subburaj Karupppasamy: “Evaluation of the Main Spatial Angles in Adolescent Idiopathic Scoliosis Optically Diagnosed”, 17th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering and the 5th Conference on Imaging and Visualization - CMBBE2021, pp. 93, 7 ‐ 9 September 2021, Bonn, Germany, Doi: 10.3929/ethz-b-000585280

[M34] Sasa Cukovic, Christoph Heidt, Daniel Studer, Gabriel Huwyler, Vanja Lukovic, William R. Taylor: “Validation of Internal Parameters of Adolescent Idiopathic Scoliosis Evaluated using ScolioSIM Solution – Preliminary Results”, Virtual Physiological Human Conference - VPH 2022, pp. 117, September 6–9, 2022, Porto, Portugal, Doi: 10.3929/ethz-b-000584407

[M34] Sasa Cukovic, Yiying Zou, Mirko Kaiser, Martin Bertsch, Vanja Lukovic, William R. Taylor : “Validation of 3d scoliosis assessments obtained from Scoliosim - a pilot study”, 19th international symposium on Computer Methods in Biomechanic and Biomedical Engineering – CMBBE2024, 30. July–1. August, 2024, Vancuver, Canada

National monographs and chapters in national monographs of national significance

[M41] Vanja Luković, Saša Ćuković, Danijela Milosević, Goran Devedžić, “Informacioni sistem za 3D dijagnostiku i monitoring skolioze”, 2016, Univerzitet u Kragujevcu, Fakultet tehničkih nauka u Čačku, br. str: 227, ISBN: 978-86-7776-186-8, OnlineLink.

[M45] Saša Ćuković, Tanja Luković, Vanja Luković: “Klasifikacija deformiteta kičmenog stuba”, poglavlje u monografiji: “Bioinženjering skolioze”, Urednici: Goran Devedžić Saša Ćuković, 2016, Izdavač: Univerzitet u Kragujevcu, Fakultet inženjerskih nauka, str. 163-189, ISBN: 978-86-6335-031-1

[M45] Vanja Luković, Danijela Milošević: “Ontologija skolioze”, poglavlje u monografiji: “Bioinženjering skolioze”, Urednici: Goran Devedžić Saša Ćuković, 2016, Izdavač: Univerzitet u Kragujevcu, Fakultet inženjerskih nauka, str. 191-224, ISBN: 978-86-6335-031-1

[M45] Vanja Luković, Goran Devedžić, Danijela Milošević: “Informacioni sistem za vizuelnu dijagnostiku i praćenje skolioza: ScolioMedIS”, poglavlje u monografiji: “Bioinženjering skolioze”, Urednici: Goran Devedžić, Saša Ćuković, 2016, Izdavač: Univerzitet u Kragujevcu, Fakultet inženjerskih nauka, str. 225-249, ISBN: 978-86-6335-031-1

Publication in a top journal of national importance

[M51] S. Ćuković, M. Erić, G. Devedžić, V. Luković, I. Ghionea: “Integration of process planning for distributed manufacturing in virtual environment” 19th International Conference on Manufacturing Systems – ICMaS 2010, Bucharest, Romania, 11-12 November 2010, Vol. 5, No.4, pp.195-198, ISSN 2067-9238

[M51] Sanja Antić, Vanja Luković, Željko Đurović: “Expert System for FDI of DC Motor Faults Using Structured Residuals Design Technique” Serbian Journal of Electrical Engineering, Faculty of Technical Sciences Čačak, Serbia, February 2023, Vol. 20, No. 1, pp. 93-105, ISSN 1451-4869.

Publication  in a leading  јournal of national importance

[M52] Saša Ćuković, Goran Devedžić, Vanja Luković, Nabil Anwer, Tanja Zečević-Luković, Subburaj Karupppasamy, “3D modeling of spinal deformities shapes using 5th degree b-splines”, Journal of Production Engineering, 2015, Vol. 18, No. 2, str. 103-106. Novi Sad, Faculty Of Technical Sciences - Department Of Production Engineering, pp. 223-226, ISSN: 1821-4932, OnlineLink

Publication in a prominent national journal

[M53] Vanja Milenković, ”Višeslojna distribuirana aplikacija sa  XML Web servisom za pristup bazi podataka SQL servera”, 4. interanacionalana konferencija TEMPO HP 2005, Časopis Jugoslovenksog društva za pogonske mašine i održavanje, 2005, Vol. 10, No. 2, pp. 377-384, Čačak, ISSN: 0354-9496.

Papers presented at conferences of national significance, printed in full

[M63] Vanja Milenković, Danijela Milošević: ”Primena ColdFusion aplikacije za povezivanje baza podataka sa Web serverom”, 48. ETRAN konferencija, 6 - 10. jun 2004, Čačak, Tehnički fakultet – Čačak, Vol. 3, str. 45-48, ISBN: 86-80509-51-5

[M63] Vanja Milenković: ”Web obrasci za prikaz i ažuriranje SQL server baza podataka korišćenjem ADO.NET-a”, 11. YU INFO simpozijum o računarskim naukama i informacionim tehnologijama, programska oblast: Internet, Zbornik radova na CD-u, 7 - 11. mart 2005, Kopaonik,  YU info društvo za informacione sisteme i računarske mreže, ISBN: 86-85525-00-4.

[M63] Vanja Milenković, Jelica Protić: ”Pregled i klasifikacija postojećih sistema softverske vizuelizacije”, YU INFO simpozijum o računarskim naukama i informacionim tehnologijama, programska oblast: Razvoj softvera i alati, Zbornik radova na CD-u, 6 - 10. mart 2006, Kopaonik, YU info društvo za informacione sisteme i računarske mreže, ISBN: 86-85525-01-2.

[M63] Vanja Milenković, Jelica Protić: ”Poređenje Vivio, Animal i Jawaa sistema vizuelizacija”, YU INFO simpozijum o računarskim naukama i informacionim tehnologijama, programska oblast: Razvoj softvera i alati, Zbornik radova na CD-u, 11 - 14. mart 2007, Kopaonik, YU info društvo za informacione sisteme i računarske mreže, ISBN: 978-86-85525-02-5

[M63] Vanja Milenković, Jelica Protić: ”Korišćenje Vivio, Animal i Jawaa sistema vizuelizacija za vizuelizaciju algoritama jednostruko ulančanih lista”, 51. ETRAN konferencija, Sekcija za Računarsku tehniku i informatiku, Zbornik radova na CD-u, 4 - 8. jun 2007, Herceg Novi, Društvo za elektroniku, telekomunikacije, računarstvo, automatiku i nuklearnu tehniku, str. RT7.4. 1-5, ISBN: 978-86-80509-62-4.

[M63] Vanja Luković, Danijela Milošević, Goran Devedžić: ”Integracija biomedicinksih ontologija sa FMA referentnom ontologijom”. 53. ETRAN konferencija, Sekcija za Računarsku tehniku i informatiku, Zbornik radova na CD-u, 15 - 18. jun 2009, Vrnjačka banja, Društvo za elektroniku, telekomunikacije, računarstvo, automatiku i nuklearnu tehniku, str. RT7.3. 1-4, ISBN: 978-86-80509-64-8.

[M63]           Milentije Lukovic, Ivan Belča, Vanja Luković, Bećko Kasalica: „Algoritamsko rešenje optimizacije kalibracionog izvora za luminescentna merenja na tankim oksidnim slojevima“, 58. ETRAN konferencija, Sekcija za nove materijale, Zbornik radova na CD-u, 2 – 5. jun 2014, Vrnjačka banja, Društvo za elektroniku, telekomunikacije, računarstvo, automatiku i nuklearnu tehniku, str. NM1.3. 1-6, ISBN: 978-86-80509-70-9.

[M63] Milentije Luković, Vanja Luković, Ivan Stanimirović, Ivan Belča, Bećko Kasalica: „Analiza opadajućih i periodično opadajućih funkcija u cilju optimizacije zračenja LED dioda na bazi GaAs, InGaAs i AlGaAs“, 59. ETRAN konferencija, Sekcija za nove materijale, Zbornik radova na CD-u, 8. – 11. juna 2015, Srebrno jezero, Društvo za elektroniku, telekomunikacije, računarstvo, automatiku i nuklearnu tehniku, str. NM1.6 1-6, ISBN: 978-86-80509-71-6.

[M63] Elvira Hadžić, Vanja Luković, Radojka Krneta, Christos Dimopoulos: „Primena softvetrskog alata LogiSim u nastavi digitalne elektronike“, 22. Skup Trendovi razvoja: Nove tehnologije u nastavi – TREND 2016, Zlatibor, 16. – 19. februara 2016. godine, Zlatibor, Univerzitet u Novom Sadu i Fakultet tehničkih nauka – Novi Sad, str. 87-90, ISBN: 978-86-7892-795-9.

[M63] Vanja Lukovic, Sasa Cukovic, Danijela Milosevic, Goran Devedzic: „Novi pristup u dijagnostici i pracenju skolioza primenom Web bazirane aplikacije ScolioMedIS“, 21st Conference and Exhibition YU INFO 2016, Kopaonik, 28. februar - 02. mart 2016, Društvo za informacione sisteme i računarske mreže, str. 154-159, ISBN: 978-86-85525-17-9.

[M63] Milentije Lukovic, Ivan Belca, Vanja Lukovic, Milos Vicic: „Metoda dobijanja ciljane spektralne raspodele svetlosnog zračenja iz višestrukih svetlosnih izvora“, 21st Conference and Exhibition YU INFO 2016, Kopaonik, 28. februar - 02. mart 2016, Društvo za informacione sisteme i računarske mreže, str. 179-184, ISBN: 978-86-85525-17-9

Papers presented at conferences of national significance, printed as abstracts

[M64] Zečević Luković Tanja, Devedžić Goran, Ćuković Saša, Bernard Niksic, Luković Vanja, Pozder Dario: „Identifikacija spoljašnjih anatomskih obeležja i kvantifikacija deformiteta optičkim metodama“, 11. Kongres fizijatara Srbije sa međunarodnim učešćem, 19-22. Maj 2011, Zlatibor, Udruženje fizijatara Srbije, Vol.37, No.1, pp.199-200, YU ISSN 0350-5952

[M64] Zečević Luković Tanja, Ristić Branko, Devedžić Goran, Ćuković Saša, Luković Vanja, Jelačić Mina: „Primena informacionog sistema ScolioMedIS u kliničkoj praksi“, Zbornik radova, 11. Kongres fizijatara Srbije sa međunarodnim učešćem, 19-22. Maj 2011 Zlatibor, Vol.37, No.1, pp.197-198, YU ISSN 0350-5952

Master's theses and doctoral dissertations

[M70] „Онтолошки базирани информациони систем за дијагностиковање и мониторинг деформитета кичменог стуба“, ментор др Данијела Милошевић, ванр. проф. Факултет техничких наука у Чачку, 29.10.2015, OnlineLink

[M72] “Упоредна анализа система визуелизација са имплементацијом алгоритама над динамичким структурама података”, под менторством др Јелице Протић, ванр. професора, Електротехнички факултет у Београду, 24.11.2007.

New technical solution implemented at the international level

 [M81] Вања Луковић, Саша Ћуковић, Горан Девеџић и Данијела Милошевић „Систем за оптичко одређивање Ленкове класификације сколиозе кичменог стуба“, Факултет техничких наука Чачак, Универзитет у Крагујевцу. Решење прихватило Министарство просвете, науке и технолошког развоја, Матични научни одбор за електронику, телекомуникације и информационе технологије, ТР098/31.10.2020, 2020, OnlineLink

Significantly improved technical solution at the national level

[M84] Milentije Luković, Uroš Pešović, Vanja Luković, “Uređaj za eksperimentalno određivanje Plankove i Bolcmanove konstante pomoću LED dioda,” Univerzitet u Kragujevcu, Fakultet tehničkih nauka Čačak, Čačak, 2023, Rešenje prihvatilo Ministarsstvo prosvete nauke i tehnološkog razvoja, Matični naučni odbor za elektroniku, telekomunikacije i informacione tehnologije, TR-19-23, OnlineLink

New technical solution (not commercialized)

[M85] Goran Devedžić, Vanja Luković, Saša Ćuković, Danijela Milošević, Tanja Luković, Zoran Jovanović, Branko Ristić, “ScolioMedIS: Informacioni sistem za monitoring i nejonizujuću 3D vizuelizaciju deformiteta kičmenog stuba,” TR-86/2015, Univerzitet u Kragujevcu, Fakultet inženjerskih nauka  Kragujevac, Kragujevac, 2015, OnlineLink

[M85] Саша Ћуковић, Горан Девеџић, Вања Луковић, Тања Зечевић-Луковић, Драган Цветковић „Апликација за детекцију анатомских обележја на дигитализованој дорзалној површи пацијента и генерисање CAD модела деформитета кичменог стуба - ScolioSIM1.0“, Институт за информационе технологије, Универзитет у Крагујевцу. Решење прихватило Министарство просвете, науке и технолошког развоја, Матични научни одбор за електронику, телекомуникације и информационе технологије, ТР088/31.08.2020, 2020, OnlineLink

Protected patent at the national level

[M92] Милентије Луковић, Урош Пешовић, Вања Луковић, Марина Милошевић „Генератор случајних бројева заснован на употреби Гајгер-Милеровог бројача са транспарентном стакленом цеви и полупроводничком ласерском диодом“, Регистарски број: 1772 (U1), Број решења о признавању права: 2022/9920, Број пријаве МП-2022/0057, Међународна класификација: G06F 7/58, Датум објављивања: 31.10.2022, Факултет техничких наука, Светог Саве 65

Books, manuals

„Приручник за употребу софтверског алата LogiSim са решеним примерима“, Вања Луковић, Радојка Крнета,  Чачак, август 2015 – штампан у оквиру NeReLa пројекта  (Building network of remote labs for strengthening university secondary vocational schools collaboration)

„Приручник за пројектовање дигиталних мрежа коришћењем FPGA интегрисаног кола са примерима“, Вања Луковић, Александар Пеулић, Ђорђе Дамњановић, Радојка Крнета,  Универзитет у Крагујевцу, Факултет техничких наука у Чачку, бр. стр. 73, ISBN 978-86-7776-212-4, Чачак, март 2017, COBISS+линк

Special awards and recognitions

AQUIT Certified Expert – C# (Visual C# Developer (.NET))

AQUIT Certified Expert – QM (Quality Management in IT Projects)

Prva nagrada MIMICS INNOVATION AWARD 2016 za EMEA region koju dodeljuje kompanija Materialise (Leuven, Belgium), ESB2016, Lyon, France, July 2016. Koautor nagrađene inovacije „From Generic to the Patient Specific 3D Model of the Spine in Case of Adolescent Idiopathic Scoliosis (AIS)„. Available at: http://www.materialise.com/en/blog/scoliosis-diagnosis

The 3rd place for the early-stage StartUp: ScolioMedIS: Solution for Non-invasive 3D Digital Diagnosis of Adolescent Idiopathic Scoliosis (AIS), at the 2nd SwissBioLabs Start-Up Challenge „Diagnostics goes digital„, 7 finalists, 3 winners. University of Applied Sciences Northwestern Switzerland, Olten, 21/06/2018. Available at:

https://www.oltnertagblatt.ch/solothurn/olten/cardioexplorer-gewinnt-die-swissbiolabs-challenge-2018-132722009

Professional development in-country and abroad

AQUIT: Education, Qualification and Certification of IT Experts in Serbia, for the Demands of IT Projects and Companies in Germany and the EU

Software tools and programming skills

Programming in C, C++, C#, Java, JavaScript, CLIPS

Working with HTML, CSS, XML languages and formats

Working with MySQL databases

Utilizing Microsoft Visual Studio programming suite (for C, C++, C#)

Utilizing Eclipse environment (for Java)

Working with XAMPP tool (PHP, MySQL)

Experience with microcontrollers (Microchip PIC family, Arduino)

Experience with FPGA integrated circuits (VHDL, Verilog)

Utilizing StarUML software package

Using Matlab programming package

Working with Microsoft Windows operating system

Proficiency in MS Office programs (Word, Excel, PowerPoint, Access)

Experience with Drools tool for designing expert systems

Utilizing Weka for machine learning

Experience with NeuronhStudio for neural networks

Forein languages

Active proficiency in English language.

Passive proficiency in German language..

ORCID

https://orcid.org/0000-0002-1887-6102